AWL’s flash synchronously.
Fault alarm indicators on the panel and alarm signal output.
Alarm signal with dry contactpassive output.
Auto-Manual switchable, if don’t need photocell automatically switch function, it could be switched to manual control.
Photocell switch PJ003 for photocell function ( optional).
Optional fault switch function: when the main light fails, will switches to the standby light automatically.
Mainly applied to aviation obstruction light’s fault alarm monitoring, ON/OFF switch and control function including flash rate adjustable for tower(transmission, telecom,microwaveetc.),chimney(power plant, coking plant, chemistry plant etc.), tall buildings, large bridges, large port machinery, large engineering machinery and wind turbine etc. This controller is specially for NANHUA Aviation obstruction light products and does not guarantee similar control functions to other nonsupporting aviation obstruction lights or other products.
Obstruction Light Controller
Control Light Branch
single Load Power
20FPM, 30FPM, 40FPM and 60FPM
Dry contact (Relay) output
Max Power Loaded
IEC61000-4-5 L- L 3kV IEC61000-4-5 L-G 6kV
IEC61000-4-2 Contact discharge8kV
Cold rolled plate with powder spray(RAL7038)
Ta-40 C～+70 C
Ta-40 C～+55 C
10% ~ 95% (no coagulation)